PHOTOGRAPHING ARCHITECTURE – A FEW SUGGESTIONS

Taking photographs of buildings is easier than taking pictures of people. Buildings stay still – people move. You don’t have to get buildings to smile or to look at the camera. Buildings don’t get fed up of waiting until you’ve set up the shot or waited for the sun to appear – or to disappear. A building won’t insist that you immediately delete the latest picture because it wasn’t ready, or was scowling or scratching its nose, or thought you’d made it look frumpy.

So it’s a doddle, taking pictures of buildings. Or is it? Certainly, unless you’re a professional architectural photographer, the equipment you need today is less difficult to deal with. Young people, who cannot recall the days before digital photography, would be astounded at the rigmarole that used to be necessary. Buying the film – black and white or colour? What speed of film? Should we do slides? Which make gives the best result? Fitting the film into the camera – making sure it’s on the sprockets and pushed into the right slot so that it will wind on.

That’s all before you come to taking the picture, and deciding what aspect of a building to take, as your film only has a limited number of exposures, and anyway is expensive. And having taken, it’s not over: you must rewind the film, store it somewhere reasonably light-proof, and then get it processed.

If you were really keen, you would develop your own – that meant chemicals, light-sensitive paper, a dark room full of equipment and plenty of time. Or you could take them to the chemist for processing. Later on, there were companies to which you could post them like Tudor Film or Gratispool, who would not only return your prints but would send you a ‘free’ new film.

If you took slides, they went off to the processor – probably Kodak or Agfa – and were returned in card mounts or, later, the plastic versions, which over the years were refined to the thinness of the card equivalents. Then you needed some way to view them – either a proper slide projector, with magazines that needed to be loaded (making sure the slides were the right way up and not back to front), or a patent plastic ‘viewer’ with a feeble light and a large magnifying lens in the front.

All this seems like another world in this digital age, when we can take as many picture as we like, instantly changing angle and exposure, and even (should we so wish) easily adding effects. And we can take photographs in dark places or on gloomy days that in the past would have required at the least a cumbersome flash (at one time with single-use flash bulbs, later, electronic).

So, with all these technicalities done away with, how can we take good pictures of architecture? First, let’s think about the viewpoint. We’re very used to looking at things from eye level – it’s what we do all the time, of course – and the taller you are, the higher your viewpoint. And taking pictures, it’s obvious we’d bring our camera up to eye level and shoot a picture. In general, that’s what we expect from architectural photographs; after all, we experience buildings through our eyes, always at the same level. But we can discover more about a building if we vary our viewpoint. So get up high – the gallery of a church, a hill above a building – or even, these days, hire a drone!

Alternatively, chose a low standpoint – or even lie on the floor and shoot your picture at an upward angle. This can be specially effective in bringing out the texture of a building, or, for example, of a flight of old stairs, emphasising the unevenness of the treads.

Whether you’re standing or lying down, always look up; much of the best architecture happens above head height – not just the original facades above more modern shop fronts, but also arches, domes, lanterns, inside or outside. In such places, you’ll find interesting patterns of curves and intersecting lines, things that can often make a good picture in themselves.

Another good ploy is to give depth to your pictures by learning some of the tricks of the old masters. Consider not just the building but the foreground. A very simple way to enhance your picture is to frame it with trees – something that Constable famously did with his paintings of Salisbury Cathedral. Or you could adjust your viewpoint so that an architectural feature appears close the camera to give depth; urns outside country houses and gravestones at churches are useful in this respect. Framing your picture within a dark arch can frequently look impressive. And fallen trees – or even long grass – can provide an interesting foreground.

Most buildings are big, so it’s always a temptation to stand well back to get as much of one in a picture as you can. But it’s often better not to try to encompass everything. Focus on the details – you can give a better idea of a building’s scale or age with a closer shot; the huge Norman columns of Durham Cathedral, with their incised decoration can tell you as much about the whole building as a distant shot that includes the whole interior.
Always keep your eye open for things that are odd or amusing to photograph; if you look closely you may find unusual shapes in walls, left by the changes over generations. Modern buildings can provide interesting roof shapes. Ceiling patterns can be very intricate. Or look out for street art and graffiti.

And as winter approaches, don’t put your camera away; pictures in adverse weather conditions can be excellent – buildings appearing out of mist, in sunshine after heavy rain, surrounded by frosted grass; all these can add to the strength of an image – as, of course can a low winter sun.

So get out with your camera and see what you can do!

Copyright © 2020 Ripon Civic Society. Hosting sponsored by HostPresto.